Konten werden bei Abfrage "aller Konten" übersprungen

Hallo,

Vorab: damit das Problem klarer wird, mal das Bild und die markierten "Ebenen" 1, 2, 3 beachten


(1) Wenn ich oben links KONTEN markiert habe, und dann auf "aktualisieren" gehe, hat Pecunia früher immer alle Konten abgefragt.
Nun - nach dem letzten Update / SEPA? - funktioniert dies nur noch bei einer Bank. Beim Rest tut sich nichts.

(2) Bei einer zweiten Bank funktioniert immerhin noch, die Bank zu markieren, und dann werden beide Unterkonten aktualisiert.

(3) Bei einer dritten Bank muss ich jedes Unterkonto einzeln aktualisieren, alle Ebenen darüber funktionieren nicht.

Auf die Dauer ist das sehr nervig. Hat jemand eine Idee woran das liegt bzw. wie ich das reparieren könnte?

Danke im Voraus!

Hallo Mike,

ich habe mal LOG level "Warnung" eingestellt, kann Dir aber auch gerne den Vollauszug schicken.
Die Meldungen sind alle GELB.

Scheint mir ggf. an "AccountNumber with more than 10 digits" zu liegen...

Danke im Voraus!
Merten


***** Bei Abruf des einzelnen Kontos *****

Keine Fehler



***** Bei Abruf der ganzen Bank (5 Unterkonten) *****

<08:03:49.164> can not check account numbers with more than 10 digits (XXXXXXXXXXXXXXXX)- skipping CRC check

<08:03:49.168> HBCIServer: KUmsAll skips account XXXXXXXXX, job is not supported

<08:03:52.821> could not insert the following user-defined data into message: CustomMsg.GV.KKUmsZeit2.curr=EUR

<08:03:53.646> could not insert the following user-defined data into message: CustomMsg.GV.Saldo5.curr=EUR



***** Bei Abruf über ALLE KONTEN ****


<08:00:06.250> could not insert the following user-defined data into message: Crypted.CryptHead.SecProfile.version=2

<08:00:06.254> could not insert the following user-defined data into message: Crypted.CryptHead.SecProfile.method=PIN

<08:00:06.256> message has no signature

<08:00:06.259> could not insert the following user-defined data into message: Crypted.CryptHead.SecProfile.version=2

<08:00:06.261> could not insert the following user-defined data into message: Crypted.CryptHead.SecProfile.method=PIN

<08:00:06.263> message has no signature

<08:00:06.265> could not insert the following user-defined data into message: Crypted.CryptHead.SecProfile.version=2

<08:00:06.267> could not insert the following user-defined data into message: Crypted.CryptHead.SecProfile.method=PIN

<08:00:06.269> message has no signature

<08:00:08.941> message has no signature

<08:00:08.944> message has no signature

<08:00:08.946> message has no signature

<08:00:18.450> can not check account numbers with more than 10 digits (XXXXXXXXXXXXXXXX)- skipping CRC check

<08:00:18.454> HBCIServer: KUmsAll skips account XXXXXXXXX, job is not supported

<08:00:18.458> could not insert the following user-defined data into message: Crypted.CryptHead.SecProfile.version=2

<08:00:18.461> could not insert the following user-defined data into message: Crypted.CryptHead.SecProfile.method=PIN

<08:00:18.464> message has no signature

<08:00:18.467> could not insert the following user-defined data into message: Crypted.CryptHead.SecProfile.version=2

<08:00:18.473> could not insert the following user-defined data into message: Crypted.CryptHead.SecProfile.method=PIN

<08:00:18.477> message has no signature

<08:00:18.482> could not insert the following user-defined data into message: Crypted.CryptHead.SecProfile.version=2

<08:00:18.487> could not insert the following user-defined data into message: Crypted.CryptHead.SecProfile.method=PIN

<08:00:18.493> message has no signature

<08:00:18.498> could not insert the following user-defined data into message: Crypted.CryptHead.SecProfile.version=2

<08:00:18.504> could not insert the following user-defined data into message: Crypted.CryptHead.SecProfile.method=PIN

<08:00:18.509> message has no signature

<08:00:18.515> could not insert the following user-defined data into message: Crypted.CryptHead.SecProfile.version=2

<08:00:18.521> could not insert the following user-defined data into message: Crypted.CryptHead.SecProfile.method=PIN

<08:00:18.528> message has no signature

<08:00:18.534> message has no signature

<08:00:18.542> message has no signature

<08:00:18.549> message has no signature

<08:00:18.555> message has no signature

<08:00:28.546> could not insert the following user-defined data into message: CustomMsg.GV.KKUmsZeit2.curr=EUR

<08:00:29.164> could not insert the following user-defined data into message: CustomMsg.GV.Saldo5.curr=EUR

Logs hatte ich letzte Woche an den Support geschickt.
Bin gespannt ob Ihr die Ursache findet.