Hallo zusammen,
ich verwende Ubuntu 18.04 und ReinerSCT.
folgende pakete aus dem repository sind installiert:
aqbanking-tools gwenhywfar-tools libchipcard-tools libifd-cyberjack6 pcsc-tools libchipcard-libgwenhywfar60-plugins
Als erstes versuche ich einen user über gnucash-aqbanking-gui zu erstellen.
Lesegerät fordet pineingabe auf. Anschließend wird die karte als zka-Karte erkannt und die Informationen werden erfolgreich ausgelesen. Bankleitzahl sowie Kundennummer/Benutzernummer.
Anschließend kommt die folgende Fehlermeldung
0:24:48 AqHBCI started
20:24:48 Connecting to bank...
20:24:48 Connected.
20:24:48 There are no tan method descriptions (yet), trying One-Step TAN.
20:24:48 Encoding queue
20:24:48 Sending queue
20:24:48 Waiting for response
20:24:49 Response received
20:24:49 Bad response (unable to decode)
20:24:49 Disconnecting from bank...
20:24:49 Disconnected.
20:24:49 AqHBCI finished.
20:24:49 No crypt key received.
20:24:49 Operation finished, you can now close this window.
Dann versuche ich über die Kommandozeile
aqhbci-tool4 createuser -b 67080050 -u XX -c XX -s hbci.commerzbank.de -N "XY" --hbciversion=300 --rdhtype=9 -t zkacard
Lesegerät fordert wieder zur Pineingabe auf. Danach ist der user erstellt.
Beim anschließenden
aqhbci-tool4 getsysid -c XX
kommt die folgende Fehlermeldung
===== Getting Certificate =====
Preparing connection
Connecting to server...
Resolving hostname "hbci.commerzbank.de" ...
IP address is "212.149.50.147"
Connecting to "hbci.commerzbank.de"
Connected to "hbci.commerzbank.de"
Using GnuTLS default ciphers.
3:2018/10/22 19-51-47:gwen(11874):syncio_tls.c: 1199: gnutls_handshake: -54 (Error in the pull function.) [fatal]
TLS Handshake Error: -54 (Error in the pull function.)
Could not connect to server
3:2018/10/22 19-51-47:aqhbci(11874):provider.c: 2042: Could not connect to server (-66)
Could not connect to server
Getting Certificate: Finished.
3:2018/10/22 19-51-47:(null)(11874):getsysid.c: 153: Error getting certificate (-66)
Kann mir jemand hier weiter helfen?
liegt es an dem "Using GnuTLS default ciphers."?
Viele Grüße
zineus
ich verwende Ubuntu 18.04 und ReinerSCT.
folgende pakete aus dem repository sind installiert:
aqbanking-tools gwenhywfar-tools libchipcard-tools libifd-cyberjack6 pcsc-tools libchipcard-libgwenhywfar60-plugins
Als erstes versuche ich einen user über gnucash-aqbanking-gui zu erstellen.
Lesegerät fordet pineingabe auf. Anschließend wird die karte als zka-Karte erkannt und die Informationen werden erfolgreich ausgelesen. Bankleitzahl sowie Kundennummer/Benutzernummer.
Anschließend kommt die folgende Fehlermeldung
0:24:48 AqHBCI started
20:24:48 Connecting to bank...
20:24:48 Connected.
20:24:48 There are no tan method descriptions (yet), trying One-Step TAN.
20:24:48 Encoding queue
20:24:48 Sending queue
20:24:48 Waiting for response
20:24:49 Response received
20:24:49 Bad response (unable to decode)
20:24:49 Disconnecting from bank...
20:24:49 Disconnected.
20:24:49 AqHBCI finished.
20:24:49 No crypt key received.
20:24:49 Operation finished, you can now close this window.
Dann versuche ich über die Kommandozeile
aqhbci-tool4 createuser -b 67080050 -u XX -c XX -s hbci.commerzbank.de -N "XY" --hbciversion=300 --rdhtype=9 -t zkacard
Lesegerät fordert wieder zur Pineingabe auf. Danach ist der user erstellt.
Beim anschließenden
aqhbci-tool4 getsysid -c XX
kommt die folgende Fehlermeldung
===== Getting Certificate =====
Preparing connection
Connecting to server...
Resolving hostname "hbci.commerzbank.de" ...
IP address is "212.149.50.147"
Connecting to "hbci.commerzbank.de"
Connected to "hbci.commerzbank.de"
Using GnuTLS default ciphers.
3:2018/10/22 19-51-47:gwen(11874):syncio_tls.c: 1199: gnutls_handshake: -54 (Error in the pull function.) [fatal]
TLS Handshake Error: -54 (Error in the pull function.)
Could not connect to server
3:2018/10/22 19-51-47:aqhbci(11874):provider.c: 2042: Could not connect to server (-66)
Could not connect to server
Getting Certificate: Finished.
3:2018/10/22 19-51-47:(null)(11874):getsysid.c: 153: Error getting certificate (-66)
Kann mir jemand hier weiter helfen?
liegt es an dem "Using GnuTLS default ciphers."?
Viele Grüße
zineus