chipcardd findet kobil kaan nicht

Offensichtlich hast Du den Kobil-Treiber nicht installiert? Wenn Du das tust, sollte es klappen...


Gruss
Martin

Ich hab die libct.so aus dem Kobil-Paket (vom 20.01.2006) nach /usr/lib/chipcard2-server/lowlevel/ kopiert. Tut sich aber trotzdem nix.
Das cardping liefert mir:

./cardping
Going to call CT_init
CT_init (Port 2): 0
CT_Reset: 0


./cardping -b2 20100101
Going to call CT_init
CT_init (Port 2): 0
CT_Reset: 0
CT_data Aufruf mit: 20 10 01 01
CT_data: 0
Antwort: 3B B7 94 00 81 31 FE 65 53 50 4B 32 33 90 00 D1 90 01

Hat jemand 'nen Tipp?

Bin etwas ratlos...

Mit Leser:

Bus 005 Device 002: ID 046d:c00e Logitech, Inc. Optical Mouse
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 002: ID 0d46:2012 <-----
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 2018:0403
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

Ohne Leser:

Bus 005 Device 002: ID 046d:c00e Logitech, Inc. Optical Mouse
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 2018:0403
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000


Ja ich starte den Server als root.
Entweder per Startskript (Gentoo), oder einfach auf der Kommandozeile chipcardd2:
start-stop-daemon --start --quiet --exec /usr/sbin/chipcardd2

Auszug aus dem Log:
7:2006/02/22 19-18-57:chipcardd(19886):driverinfo.c: 81: File found: /usr/lib/chipcard2-server/lowlevel/libct.so

7:2006/02/22 19-18-57:chipcardd(19886):devicemanager.c: 2771: Device UsbRaw/0d46/2012 up
6:2006/02/22 19-18-57:chipcardd(19886):devicemanager.c: 2894: Device UsbRaw/0d46/2012 is not a known reader
7:2006/02/22 19-18-57:chipcardd(19886):devicemanager.c: 2771: Device UsbTty/0d46/2012 up
6:2006/02/22 19-18-57:chipcardd(19886):devicemanager.c: 2894: Device UsbTty/0d46/2012 is not a known reader

Das hier sagt usbview:

USB Adapter K
Manufacturer: KOBIL
Speed: 1.5Mb/s (low)
USB Version: 1.10
Device Class: ff(vend.)
Device Subclass: ff
Device Protocol: ff
Maximum Default Endpoint Size: 8
Number of Configurations: 1
Vendor Id: 0d46
Product Id: 2012
Revision Number: 2.01

Config Number: 1
Number of Interfaces: 1
Attributes: 80
MaxPower Needed: 150mA

Interface Number: 0
Name: kobil
Alternate Number: 0
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 2

Endpoint Address: 01
Direction: out
Attribute: 3
Type: Int.
Max Packet Size: 8
Interval: 16ms

Endpoint Address: 81
Direction: in
Attribute: 3
Type: Int.
Max Packet Size: 8
Interval: 10ms

Interface Number: 0
Name: kobil
Alternate Number: 1
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 2

Endpoint Address: 01
Direction: out
Attribute: 3
Type: Int.
Max Packet Size: 8
Interval: 8ms

Endpoint Address: 81
Direction: in
Attribute: 3
Type: Int.
Max Packet Size: 8
Interval: 3ms

Interface Number: 0
Name: kobil
Alternate Number: 2
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 2

Endpoint Address: 01
Direction: out
Attribute: 3
Type: Int.
Max Packet Size: 8
Interval: 4ms

Endpoint Address: 81
Direction: in
Attribute: 3
Type: Int.
Max Packet Size: 8
Interval: 1ms

Nachdem ich mal das Ganze aus dem Tarball installiert habe,
bin ich etwas weiter.
Das chipcard-tool check bringt einen Fehler.

chipcard-tool list
Buffer:
Pos : 176 (00b0)
Buffer Size : 1537
Hard limit : 8388608
Bytes Used : 176
Bytes Reserved : 0
Flags : 00000001 ( OWNED )
Mode : 00000003 ( DYNAMIC ABORT_ON_MEMFULL )
Bookmarks : 0 0 0 0
Data:
String size is 176:
0000: 69 70 63 20 7b 0a 63 68 61 72 20 69 64 3d 22 31 ipc {.char id="1
0010: 22 0a 63 68 61 72 20 63 6d 64 3d 22 43 6c 69 65 ".char cmd="Clie
0020: 6e 74 25 35 46 52 65 61 64 79 22 0a 7d 0a 64 61 nt%5FReady".}.da
0030: 74 61 20 7b 0a 63 68 61 72 20 41 70 70 6c 69 63 ta {.char Applic
0040: 61 74 69 6f 6e 3d 22 63 68 69 70 63 61 72 64 25 ation="chipcard%
0050: 32 44 74 6f 6f 6c 22 0a 63 68 61 72 20 47 77 65 2Dtool".char Gwe
0060: 6e 56 65 72 73 69 6f 6e 3d 22 31 2e 39 39 2e 36 nVersion="1.99.6
0070: 2e 30 73 74 61 62 6c 65 22 0a 63 68 61 72 20 43 .0stable".char C
0080: 68 69 70 63 61 72 64 56 65 72 73 69 6f 6e 3d 22 hipcardVersion="
0090: 32 2e 30 2e 30 2e 30 73 74 61 62 6c 65 22 0a 63 2.0.0.0stable".c
00a0: 68 61 72 20 53 79 73 74 65 6d 3d 22 22 0a 7d 0a har System="".}.
Buffer:
Pos : 204 (00cc)
Buffer Size : 1537
Hard limit : 8388608
Bytes Used : 204
Bytes Reserved : 0
Flags : 00000001 ( OWNED )
Mode : 00000003 ( DYNAMIC ABORT_ON_MEMFULL )
Bookmarks : 0 0 0 0
Data:
String size is 204:
0000: 69 70 63 20 7b 0a 63 68 61 72 20 69 64 3d 22 32 ipc {.char id="2
0010: 22 0a 63 68 61 72 20 63 6d 64 3d 22 43 6c 69 65 ".char cmd="Clie
0020: 6e 74 25 35 46 53 65 74 4e 6f 74 69 66 79 22 0a nt%5FSetNotify".
0030: 7d 0a 64 61 74 61 20 7b 0a 63 68 61 72 20 66 6c }.data {.char fl
0040: 61 67 3d 22 64 72 69 76 65 72 25 33 41 73 74 61 ag="driver%3Asta
0050: 72 74 22 2c 20 22 64 72 69 76 65 72 25 33 41 75 rt", "driver%3Au
0060: 70 22 2c 20 22 64 72 69 76 65 72 25 33 41 64 6f p", "driver%3Ado
0070: 77 6e 22 2c 20 22 64 72 69 76 65 72 25 33 41 65 wn", "driver%3Ae
0080: 72 72 6f 72 22 2c 20 22 72 65 61 64 65 72 25 33 rror", "reader%3
0090: 41 73 74 61 72 74 22 2c 20 22 72 65 61 64 65 72 Astart", "reader
00a0: 25 33 41 75 70 22 2c 20 22 72 65 61 64 65 72 25 %3Aup", "reader%
00b0: 33 41 64 6f 77 6e 22 2c 20 22 72 65 61 64 65 72 3Adown", "reader
00c0: 25 33 41 65 72 72 6f 72 22 0a 7d 0a %3Aerror".}.
Server: 44043e71
Readers:
- auto1-ko_kaan_plus_usb (ko_kaan_plus_usb, port 0)


und:

chipcard-tool check
Buffer:
Pos : 176 (00b0)
Buffer Size : 1537
Hard limit : 8388608
Bytes Used : 176
Bytes Reserved : 0
Flags : 00000001 ( OWNED )
Mode : 00000003 ( DYNAMIC ABORT_ON_MEMFULL )
Bookmarks : 0 0 0 0
Data:
String size is 176:
0000: 69 70 63 20 7b 0a 63 68 61 72 20 69 64 3d 22 31 ipc {.char id="1
0010: 22 0a 63 68 61 72 20 63 6d 64 3d 22 43 6c 69 65 ".char cmd="Clie
0020: 6e 74 25 35 46 52 65 61 64 79 22 0a 7d 0a 64 61 nt%5FReady".}.da
0030: 74 61 20 7b 0a 63 68 61 72 20 41 70 70 6c 69 63 ta {.char Applic
0040: 61 74 69 6f 6e 3d 22 63 68 69 70 63 61 72 64 25 ation="chipcard%
0050: 32 44 74 6f 6f 6c 22 0a 63 68 61 72 20 47 77 65 2Dtool".char Gwe
0060: 6e 56 65 72 73 69 6f 6e 3d 22 31 2e 39 39 2e 36 nVersion="1.99.6
0070: 2e 30 73 74 61 62 6c 65 22 0a 63 68 61 72 20 43 .0stable".char C
0080: 68 69 70 63 61 72 64 56 65 72 73 69 6f 6e 3d 22 hipcardVersion="
0090: 32 2e 30 2e 30 2e 30 73 74 61 62 6c 65 22 0a 63 2.0.0.0stable".c
00a0: 68 61 72 20 53 79 73 74 65 6d 3d 22 22 0a 7d 0a har System="".}.
Buffer:
Pos : 204 (00cc)
Buffer Size : 1537
Hard limit : 8388608
Bytes Used : 204
Bytes Reserved : 0
Flags : 00000001 ( OWNED )
Mode : 00000003 ( DYNAMIC ABORT_ON_MEMFULL )
Bookmarks : 0 0 0 0
Data:
String size is 204:
0000: 69 70 63 20 7b 0a 63 68 61 72 20 69 64 3d 22 32 ipc {.char id="2
0010: 22 0a 63 68 61 72 20 63 6d 64 3d 22 43 6c 69 65 ".char cmd="Clie
0020: 6e 74 25 35 46 53 65 74 4e 6f 74 69 66 79 22 0a nt%5FSetNotify".
0030: 7d 0a 64 61 74 61 20 7b 0a 63 68 61 72 20 66 6c }.data {.char fl
0040: 61 67 3d 22 64 72 69 76 65 72 25 33 41 73 74 61 ag="driver%3Asta
0050: 72 74 22 2c 20 22 64 72 69 76 65 72 25 33 41 75 rt", "driver%3Au
0060: 70 22 2c 20 22 64 72 69 76 65 72 25 33 41 64 6f p", "driver%3Ado
0070: 77 6e 22 2c 20 22 64 72 69 76 65 72 25 33 41 65 wn", "driver%3Ae
0080: 72 72 6f 72 22 2c 20 22 72 65 61 64 65 72 25 33 rror", "reader%3
0090: 41 73 74 61 72 74 22 2c 20 22 72 65 61 64 65 72 Astart", "reader
00a0: 25 33 41 75 70 22 2c 20 22 72 65 61 64 65 72 25 %3Aup", "reader%
00b0: 33 41 64 6f 77 6e 22 2c 20 22 72 65 61 64 65 72 3Adown", "reader
00c0: 25 33 41 65 72 72 6f 72 22 0a 7d 0a %3Aerror".}.
Buffer:
Pos : 59 (003b)
Buffer Size : 1537
Hard limit : 8388608
Bytes Used : 59
Bytes Reserved : 0
Flags : 00000001 ( OWNED )
Mode : 00000003 ( DYNAMIC ABORT_ON_MEMFULL )
Bookmarks : 0 0 0 0
Data:
String size is 59:
0000: 69 70 63 20 7b 0a 63 68 61 72 20 69 64 3d 22 33 ipc {.char id="3
0010: 22 0a 63 68 61 72 20 63 6d 64 3d 22 43 6c 69 65 ".char cmd="Clie
0020: 6e 74 25 35 46 53 74 61 72 74 57 61 69 74 22 0a nt%5FStartWait".
0030: 7d 0a 64 61 74 61 20 7b 0a 7d 0a }.data {.}.
Buffer:
Pos : 122 (007a)
Buffer Size : 1537
Hard limit : 8388608
Bytes Used : 122
Bytes Reserved : 0
Flags : 00000001 ( OWNED )
Mode : 00000003 ( DYNAMIC ABORT_ON_MEMFULL )
Bookmarks : 0 0 0 0
Data:
String size is 122:
0000: 69 70 63 20 7b 0a 63 68 61 72 20 69 64 3d 22 31 ipc {.char id="1
0010: 22 0a 63 68 61 72 20 63 6d 64 3d 22 44 72 69 76 ".char cmd="Driv
0020: 65 72 25 35 46 52 65 61 64 79 22 0a 7d 0a 64 61 er%5FReady".}.da
0030: 74 61 20 7b 0a 63 68 61 72 20 64 72 69 76 65 72 ta {.char driver
0040: 49 64 3d 22 34 34 30 34 33 64 34 36 22 0a 63 68 Id="44043d46".ch
0050: 61 72 20 63 6f 64 65 3d 22 4f 4b 22 0a 63 68 61 ar code="OK".cha
0060: 72 20 74 65 78 74 3d 22 4c 69 62 72 61 72 79 20 r text="Library
0070: 6c 6f 61 64 65 64 22 0a 7d 0a loaded".}.
Buffer:
Pos : 158 (009e)
Buffer Size : 1537
Hard limit : 8388608
Bytes Used : 158
Bytes Reserved : 0
Flags : 00000001 ( OWNED )
Mode : 00000003 ( DYNAMIC ABORT_ON_MEMFULL )
Bookmarks : 0 0 0 0
Data:
String size is 158:
0000: 69 70 63 20 7b 0a 63 68 61 72 20 69 64 3d 22 32 ipc {.char id="2
0010: 22 0a 63 68 61 72 20 72 65 66 69 64 3d 22 32 22 ".char refid="2"
0020: 0a 63 68 61 72 20 63 6d 64 3d 22 44 72 69 76 65 .char cmd="Drive
0030: 72 25 35 46 53 74 61 72 74 52 65 61 64 65 72 52 r%5FStartReaderR
0040: 65 73 70 6f 6e 73 65 22 0a 7d 0a 64 61 74 61 20 esponse".}.data
0050: 7b 0a 63 68 61 72 20 72 65 61 64 65 72 49 64 3d {.char readerId=
0060: 22 34 34 30 34 33 64 34 36 22 0a 63 68 61 72 20 "44043d46".char
0070: 63 6f 64 65 3d 22 45 52 52 4f 52 22 0a 63 68 61 code="ERROR".cha
0080: 72 20 74 65 78 74 3d 22 55 6e 6b 6e 6f 77 6e 20 r text="Unknown
0090: 65 72 72 6f 72 20 63 6f 64 65 22 0a 7d 0a error code".}.
Readers:
- auto1-ko_kaan_plus_usb (ko_kaan_plus_usb, port 0, ): error
Event log:
13:14:02 Reader listing
13:14:05 Reader error (Unknown error code)

In /usr/var/log/chipcard2/drivers/kobil_ctapi/auto1-ko_kaan_plus_usb.log steht:

5:2006/02/28 13-40-02:auto1-ko_kaan_plus_usb(31582):driverctapi.c: 285: Calling dataFn
5:2006/02/28 13-40-02:auto1-ko_kaan_plus_usb(31582):driverctapi.c: 293: Returned from dataFn (-1)
3:2006/02/28 13-40-02:auto1-ko_kaan_plus_usb(31582):driverctapi.c: 296: CTAPI error on "CT_data": -1
3:2006/02/28 13-40-02:auto1-ko_kaan_plus_usb(31582):driverctapi.c: 860: Could not deinit reader "auto1-ko_kaan_plus_usb"
4:2006/02/28 13-40-02:auto1-ko_kaan_plus_usb(31582):driver.c: 1979: Could not disconnect reader
5:2006/02/28 13-43-09:auto1-ko_kaan_plus_usb(31693):driver.c: 1516: Init reader auto1-ko_kaan_plus_usb
5:2006/02/28 13-43-09:auto1-ko_kaan_plus_usb(31693):driverctapi.c: 796: Initializing CTAPI driver with 0, 1 (0001)
3:2006/02/28 13-43-09:auto1-ko_kaan_plus_usb(31693):driverctapi.c: 803: Could not init reader "auto1-ko_kaan_plus_usb" at port 1 : -1
3:2006/02/28 13-43-09:auto1-ko_kaan_plus_usb(31693):driver.c: 1523: Could not connect reader auto1-ko_kaan_plus_usb (-1: Unknown error code)
5:2006/02/28 13-43-09:auto1-ko_kaan_plus_usb(31693):driver.c: 1561: Reader start handled
5:2006/02/28 13-43-40:auto1-ko_kaan_plus_usb(31693):driverctapi.c: 842: Disconnecting reader auto1-ko_kaan_plus_usb
5:2006/02/28 13-43-40:auto1-ko_kaan_plus_usb(31693):driverctapi.c: 285: Calling dataFn
5:2006/02/28 13-43-40:auto1-ko_kaan_plus_usb(31693):driverctapi.c: 293: Returned from dataFn (-1)
3:2006/02/28 13-43-40:auto1-ko_kaan_plus_usb(31693):driverctapi.c: 296: CTAPI error on "CT_data": -1
3:2006/02/28 13-43-40:auto1-ko_kaan_plus_usb(31693):driverctapi.c: 860: Could not deinit reader "auto1-ko_kaan_plus_usb"
4:2006/02/28 13-43-40:auto1-ko_kaan_plus_usb(31693):driver.c: 1979: Could not disconnect reader
5:2006/02/28 13-45-41:auto1-ko_kaan_plus_usb(31695):driver.c: 1516: Init reader auto1-ko_kaan_plus_usb
5:2006/02/28 13-45-41:auto1-ko_kaan_plus_usb(31695):driverctapi.c: 796: Initializing CTAPI driver with 0, 1 (0001)
3:2006/02/28 13-45-41:auto1-ko_kaan_plus_usb(31695):driverctapi.c: 803: Could not init reader "auto1-ko_kaan_plus_usb" at port 1 : -1
3:2006/02/28 13-45-41:auto1-ko_kaan_plus_usb(31695):driver.c: 1523: Could not connect reader auto1-ko_kaan_plus_usb (-1: Unknown error code)
5:2006/02/28 13-45-41:auto1-ko_kaan_plus_usb(31695):driver.c: 1561: Reader start handled
5:2006/02/28 13-46-12:auto1-ko_kaan_plus_usb(31695):driverctapi.c: 842: Disconnecting reader auto1-ko_kaan_plus_usb
5:2006/02/28 13-46-12:auto1-ko_kaan_plus_usb(31695):driverctapi.c: 285: Calling dataFn
5:2006/02/28 13-46-12:auto1-ko_kaan_plus_usb(31695):driverctapi.c: 293: Returned from dataFn (-1)
3:2006/02/28 13-46-12:auto1-ko_kaan_plus_usb(31695):driverctapi.c: 296: CTAPI error on "CT_data": -1
3:2006/02/28 13-46-12:auto1-ko_kaan_plus_usb(31695):driverctapi.c: 860: Could not deinit reader "auto1-ko_kaan_plus_usb"
4:2006/02/28 13-46-12:auto1-ko_kaan_plus_usb(31695):driver.c: 1979: Could not disconnect reader
5:2006/02/28 13-55-40:auto1-ko_kaan_plus_usb(31818):driver.c: 1516: Init reader auto1-ko_kaan_plus_usb
5:2006/02/28 13-55-40:auto1-ko_kaan_plus_usb(31818):driverctapi.c: 796: Initializing CTAPI driver with 0, 1 (0001)
3:2006/02/28 13-55-40:auto1-ko_kaan_plus_usb(31818):driverctapi.c: 803: Could not init reader "auto1-ko_kaan_plus_usb" at port 1 : -1
3:2006/02/28 13-55-40:auto1-ko_kaan_plus_usb(31818):driver.c: 1523: Could not connect reader auto1-ko_kaan_plus_usb (-1: Unknown error code)
5:2006/02/28 13-55-40:auto1-ko_kaan_plus_usb(31818):driver.c: 1561: Reader start handled
5:2006/02/28 13-56-11:auto1-ko_kaan_plus_usb(31818):driverctapi.c: 842: Disconnecting reader auto1-ko_kaan_plus_usb
5:2006/02/28 13-56-11:auto1-ko_kaan_plus_usb(31818):driverctapi.c: 285: Calling dataFn
5:2006/02/28 13-56-11:auto1-ko_kaan_plus_usb(31818):driverctapi.c: 293: Returned from dataFn (-1)
3:2006/02/28 13-56-11:auto1-ko_kaan_plus_usb(31818):driverctapi.c: 296: CTAPI error on "CT_data": -1
3:2006/02/28 13-56-11:auto1-ko_kaan_plus_usb(31818):driverctapi.c: 860: Could not deinit reader "auto1-ko_kaan_plus_usb"
4:2006/02/28 13-56-11:auto1-ko_kaan_plus_usb(31818):driver.c: 1979: Could not disconnect reader

Hallo?
Liegt das jetzt an mir? Hab ich was falsch konfiguriert?

Hmm ok.
Wenn du moechtest, kann ich dir meinen schicken. Wenn's hilft.
Sonst verkauf ich den wieder und besorg mir einen mit dem es geht.

Ok.
Ich werde zuerst noch PIN/TAN Onlinebanking beantragen und sobald ich das hab, schick ich das Ding los.

Ich schick dir meine E-Mail-Adresse per privater Nachricht uebers Forum.
Dann kannst du mir deine Postadresse schicken. Oder du schickst sie mir auch per priv. Nachricht.