Zugang Sparda Bank

 
KHST
Benutzer
Avatar
Geschlecht:
Herkunft: Mainz
Beiträge: 15
Dabei seit: 10 / 2013
Betreff:

Zugang Sparda Bank

 · 
Gepostet: 03.10.2016 - 17:05 Uhr  ·  #1
Seit 26.09. funktioniert mein Zugang zur Sparda-Bank nicht mehr. Hat das was mit dem Abschalten der Papier-Tan-Listen zu tun.
Ich habe Jameica und Hibiscus neu aufgesetzt. Leider keine Änderung.
Folgende Fehler werden gemeldet:

Zitat

[03.10.2016 16:55:36] trying to parse message as crypted message
[03.10.2016 16:55:36] message seems not to be encrypted; tring to parse it as DialogInitAnonRes message
[03.10.2016 16:55:36] parse empfangene Antwortnachricht (DialogInitAnonRes)
[03.10.2016 16:55:36] received message after decryption: HNHBK:1:3+000000000311+300+MWOwWz3KilcBAACmzJkdJQoDCgQA+1+MWOwWz3KilcBAACmzJkdJQoDCgQA:1'HIRMG:2:2+9050::Die Nachricht enthält Fehler.+9800::Dialog abgebrochen+9010::Initialisierung fehlgeschlagen, Auftrag nicht bearbeitet.+9000::Übertragung des Auftrags zum/vom Verarbeitungssystem fehlgeschlagen.'HNHBS:3:1+1'
[03.10.2016 16:55:36] extracting data from received message
[03.10.2016 16:55:36] HBCI error code: 9050:Die Nachricht enthält Fehler. org.kapott.hbci.status.HBCIStatus.addRetVal(HBCIStatus.java:72)
[03.10.2016 16:55:36] HBCI error code: 9800:Dialog abgebrochen org.kapott.hbci.status.HBCIStatus.addRetVal(HBCIStatus.java:72)
[03.10.2016 16:55:36] HBCI error code: 9010:Initialisierung fehlgeschlagen, Auftrag nicht bearbeitet. org.kapott.hbci.status.HBCIStatus.addRetVal(HBCIStatus.java:72)
[03.10.2016 16:55:36] HBCI error code: 9000:Übertragung des Auftrags zum/vom Verarbeitungssystem fehlgeschlagen. org.kapott.hbci.status.HBCIStatus.addRetVal(HBCIStatus.java:72)


Hat jemand eine Idee?

Karl-Heinz
msa
Benutzer
Avatar
Geschlecht:
Herkunft: München
Alter: 63
Beiträge: 7571
Dabei seit: 03 / 2007
Betreff:

Re: Zugang Sparda Bank

 · 
Gepostet: 03.10.2016 - 20:10 Uhr  ·  #2
Mit der Abschaffung der iTAN hat das sicher ncihts zu tun, die erfolgt erst zum 28.02.2017.

Es liegt aber hier wohl ein Fehler auf Seiten des Bankrechners vor, evtl. ein Berechtigungsproblem oder sonst was. Die 9000er Fehlermeldungen sind nicht von Hibiscus sondern DIREKT vom Bankrechner und werden von Hibiscus nur angezeigt. Und der Bankrechner sagt, daß er den Auftrag nicht an das verarbeitende System weiterleiten kann...

Ich würde da jetzt als Erstes mal mit der Bank sprechen, ob da irgend ein Problem mit dem Konto vorliegt. Interessant wäre noch, unter welchem Betriebssystem Du arbeitest...
hibiscus
Benutzer
Avatar
Geschlecht: keine Angabe
Herkunft: Leipzig
Homepage: willuhn.de/
Beiträge: 11351
Dabei seit: 03 / 2005
Betreff:

Re: Zugang Sparda Bank

 · 
Gepostet: 04.10.2016 - 10:21 Uhr  ·  #3
Also "Übertragung des Auftrags zum/vom Verarbeitungssystem fehlgeschlagen." klingt fuer mich noch am ehesten wie schlicht Wartungsarbeiten bei der Bank. Waere ja zum Feiertag vermutlich nicht ungewoehnlich - in der Annahme, dass da weniger User aktiv sind.
KHST
Benutzer
Avatar
Geschlecht:
Herkunft: Mainz
Beiträge: 15
Dabei seit: 10 / 2013
Betreff:

Re: Zugang Sparda Bank

 · 
Gepostet: 08.10.2016 - 14:16 Uhr  ·  #4
Leider bekomme ich den Zugang nicht mehr hin. Ich habe HIBISCUS neu installiert und das Konto neu angelegt.
Ich bekome immer nur folgende Fehler.
Kann hier jemand weiterhelfen?

Karl-Heinz

Code

  at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Unknown Source)
  at org.eclipse.swt.widgets.Display.runAsyncMessages(Unknown Source)
  at org.eclipse.swt.widgets.Display.readAndDispatch(Unknown Source)
  at de.willuhn.jameica.gui.GUI.loop(GUI.java:913)
  at de.willuhn.jameica.gui.GUI.init(GUI.java:324)
  at de.willuhn.jameica.system.Application.init(Application.java:148)
  at de.willuhn.jameica.system.Application.newInstance(Application.java:90)
  at de.willuhn.jameica.Main.main(Main.java:78)
[08.10.2016 14:12:42] [error] fetching BPD failed: 9050:Die Nachricht enthält Fehler.
9800:Dialog abgebrochen
9010:Initialisierung fehlgeschlagen, Auftrag nicht bearbeitet.
9000:Übertragung des Auftrags zum/vom Verarbeitungssystem fehlgeschlagen.
[08.10.2016 14:12:42] org.kapott.hbci.exceptions.ProcessException: Abholen der BPD fehlgeschlagen
  at org.kapott.hbci.manager.HBCIInstitute.fetchBPD(HBCIInstitute.java:335)
  at org.kapott.hbci.manager.HBCIInstitute.register(HBCIInstitute.java:451)
  at org.kapott.hbci.manager.HBCIHandler.registerInstitute(HBCIHandler.java:268)
  at org.kapott.hbci.manager.HBCIHandler.<init>(HBCIHandler.java:132)
  at de.willuhn.jameica.hbci.passports.pintan.server.PassportHandleImpl.open(PassportHandleImpl.java:175)
  at de.willuhn.jameica.hbci.synchronize.hbci.HBCISynchronizeBackend$HBCIJobGroup$TaskHandleOpen.internalExecute(HBCISynchronizeBackend.java:534)
  at de.willuhn.jameica.hbci.synchronize.hbci.HBCISynchronizeBackend$HBCIJobGroup$TaskHandleOpen.internalExecute(HBCISynchronizeBackend.java:506)
  at de.willuhn.jameica.hbci.synchronize.hbci.HBCISynchronizeBackend$HBCIJobGroup$AbstractTaskWrapper.run(HBCISynchronizeBackend.java:643)
  at org.eclipse.swt.widgets.RunnableLock.run(Unknown Source)
  at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Unknown Source)
  at org.eclipse.swt.widgets.Display.runAsyncMessages(Unknown Source)
  at org.eclipse.swt.widgets.Display.readAndDispatch(Unknown Source)
  at de.willuhn.jameica.gui.GUI.loop(GUI.java:913)
  at de.willuhn.jameica.gui.GUI.init(GUI.java:324)
  at de.willuhn.jameica.system.Application.init(Application.java:148)
  at de.willuhn.jameica.system.Application.newInstance(Application.java:90)
  at de.willuhn.jameica.Main.main(Main.java:78)
[08.10.2016 14:12:42] FAILED! - maybe this institute does not support anonymous logins
[08.10.2016 14:12:42] we will nevertheless go on
[08.10.2016 14:12:42] [warn] can not check if requested parameters are supported
[08.10.2016 14:12:42] hole neue System-ID
[08.10.2016 14:12:42] fetching new sys-id from institute
[08.10.2016 14:12:42] erzeuge HBCI-Nachricht Synch
[08.10.2016 14:12:42] signiere HBCI-Nachricht
[08.10.2016 14:12:48] [warn] the job with the code HNSHK seems not to be allowed with PIN/TAN
[08.10.2016 14:12:48] [warn] the job with the code HKIDN seems not to be allowed with PIN/TAN
[08.10.2016 14:12:48] [warn] the job with the code HKVVB seems not to be allowed with PIN/TAN
[08.10.2016 14:12:48] [warn] the job with the code HKSYN seems not to be allowed with PIN/TAN
[08.10.2016 14:12:48] verschlüssele HBCI-Nachricht
[08.10.2016 14:12:48] Verbinde mit https://fints.bankingonline.de:443/fints/FinTs30PinTanHttpGate und prüfe Zertifikat
[08.10.2016 14:12:48] versende HBCI-Nachricht
[08.10.2016 14:12:48] [warn] no log.ssl.filename specified - logging to HBCI4Java logger
[08.10.2016 14:12:48] warte auf Antwortdaten
[08.10.2016 14:12:48] warte auf Antwortdaten
[08.10.2016 14:12:48] [error] HBCI error code: 9050:Die Nachricht enthält Fehler.
[08.10.2016 14:12:48] [error] HBCI error code: 9800:Dialog abgebrochen
[08.10.2016 14:12:48] [error] HBCI error code: 9340:Unbekannte oder unzulässige Signatur.
[08.10.2016 14:12:48] überprüfe Signatur der Antwortnachricht
[08.10.2016 14:12:48] [warn] message has no signature
[08.10.2016 14:12:48] [error] org.kapott.hbci.exceptions.HBCI_Exception: Nachricht ist nicht verschlüsselt
  at org.kapott.hbci.manager.HBCIKernelImpl.rawDoIt(HBCIKernelImpl.java:462)
  at org.kapott.hbci.manager.HBCIKernelImpl.rawDoIt(HBCIKernelImpl.java:178)
  at org.kapott.hbci.manager.HBCIUser.fetchSysId(HBCIUser.java:442)
  at org.kapott.hbci.manager.HBCIUser.updateUserData(HBCIUser.java:665)
  at org.kapott.hbci.manager.HBCIUser.register(HBCIUser.java:690)
  at org.kapott.hbci.manager.HBCIHandler.registerUser(HBCIHandler.java:279)
  at org.kapott.hbci.manager.HBCIHandler.<init>(HBCIHandler.java:133)
  at de.willuhn.jameica.hbci.passports.pintan.server.PassportHandleImpl.open(PassportHandleImpl.java:175)
  at de.willuhn.jameica.hbci.synchronize.hbci.HBCISynchronizeBackend$HBCIJobGroup$TaskHandleOpen.internalExecute(HBCISynchronizeBackend.java:534)
  at de.willuhn.jameica.hbci.synchronize.hbci.HBCISynchronizeBackend$HBCIJobGroup$TaskHandleOpen.internalExecute(HBCISynchronizeBackend.java:506)
  at de.willuhn.jameica.hbci.synchronize.hbci.HBCISynchronizeBackend$HBCIJobGroup$AbstractTaskWrapper.run(HBCISynchronizeBackend.java:643)
  at org.eclipse.swt.widgets.RunnableLock.run(Unknown Source)
  at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Unknown Source)
  at org.eclipse.swt.widgets.Display.runAsyncMessages(Unknown Source)
  at org.eclipse.swt.widgets.Display.readAndDispatch(Unknown Source)
  at de.willuhn.jameica.gui.GUI.loop(GUI.java:913)
  at de.willuhn.jameica.gui.GUI.init(GUI.java:324)
  at de.willuhn.jameica.system.Application.init(Application.java:148)
  at de.willuhn.jameica.system.Application.newInstance(Application.java:90)
  at de.willuhn.jameica.Main.main(Main.java:78)
[08.10.2016 14:12:48] detected 'invalid PIN' error - clearing passport PIN
[08.10.2016 14:12:48] Fehler: Fehler beim Ermitteln einer neuen System-ID

hibiscus
Benutzer
Avatar
Geschlecht: keine Angabe
Herkunft: Leipzig
Homepage: willuhn.de/
Beiträge: 11351
Dabei seit: 03 / 2005
Betreff:

Re: Zugang Sparda Bank

 · 
Gepostet: 10.10.2016 - 10:34 Uhr  ·  #5
Im Log finden sich noch: "9340:Unbekannte oder unzulässige Signatur. " und "detected 'invalid PIN' error - clearing passport PIN ". Wenn du sicher bist, dass die PIN richtig ist, wende dich mal an deine Bank. Eventuell ist dein Zugang gesperrt.
KHST
Benutzer
Avatar
Geschlecht:
Herkunft: Mainz
Beiträge: 15
Dabei seit: 10 / 2013
Betreff:

Re: Zugang Sparda Bank

 · 
Gepostet: 11.10.2016 - 14:22 Uhr  ·  #6
Mein Zugang zur Bank ist nicht gesperrt. Über das Web-Portal der Sparda-Bank kann ich mich einloggen.

Karl-Heinz
hibiscus
Benutzer
Avatar
Geschlecht: keine Angabe
Herkunft: Leipzig
Homepage: willuhn.de/
Beiträge: 11351
Dabei seit: 03 / 2005
Betreff:

Re: Zugang Sparda Bank

 · 
Gepostet: 11.10.2016 - 14:37 Uhr  ·  #7
Kann es sein, dass deine Sparda-Bank eventuell ihren Bankzugang (Also HBCI-Version und Server-Adresse) umgestellt hat? Das wuerde erklaeren, warum es "von selbst" kaputt ging. Geh mal auf http://hbci-zka.de/institute/institut_auswahl.htm und gib dort deine BLZ ein. Welche ist das eigentlich? Vergleiche die dort angezeigte Server-Adresse mit der in Hibiscus im PIN/TAN-Zugang hinterlegten.
KHST
Benutzer
Avatar
Geschlecht:
Herkunft: Mainz
Beiträge: 15
Dabei seit: 10 / 2013
Betreff:

Re: Zugang Sparda Bank

 · 
Gepostet: 11.10.2016 - 18:04 Uhr  ·  #8
Das ist die Sparda Bank-Südwest BLZ 55090500.
Die PIN/TAN URL ist
Zitat
https://fints.bankingonline.de/fints/FinTs30PinTanHttpGate

Die scheint sich nicht geändert zu haben. Die habe ich natürlich auch eingetragen.

Karl-Heinz
hibiscus
Benutzer
Avatar
Geschlecht: keine Angabe
Herkunft: Leipzig
Homepage: willuhn.de/
Beiträge: 11351
Dabei seit: 03 / 2005
Betreff:

Re: Zugang Sparda Bank

 · 
Gepostet: 11.10.2016 - 18:09 Uhr  ·  #9
Aber irgendwas MUSS sich geaendert haben. Die Meldung "9340:Unbekannte oder unzulässige Signatur." kommt direkt von der Bank. Nicht von Hibiscus. Und wenn du in Hibiscus nichts geaendert hat, es aber vorher funktioniert hat, dann muss die Bank da irgendwas umgestellt haben oder der HBCI-Zugang wurde gesperrt. Bei manchen Banken kann der HBCI-Zugang getrennt vom Zugang des Web-Portals gesperrt werden. Eventuell ist ja nur der HBCI-Zugang gesperrt.
Du wirst nicht umhin kommen, dich bei deiner Bank zu melden und die fragen, was da mit deinem HBCI-Zugang los ist.
sme
Benutzer
Avatar
Geschlecht: keine Angabe
Beiträge: 242
Dabei seit: 11 / 2006
Betreff:

Re: Zugang Sparda Bank

 · 
Gepostet: 12.10.2016 - 18:22 Uhr  ·  #10
zur Info:
Sparda Berlin und Netbank funktionieren problemlos - mit derselben URL
KHST
Benutzer
Avatar
Geschlecht:
Herkunft: Mainz
Beiträge: 15
Dabei seit: 10 / 2013
Betreff:

Re: Zugang Sparda Bank

 · 
Gepostet: 12.10.2016 - 19:22 Uhr  ·  #11
Ich habe gestern mit Technikern der Sparda Bank telefoniert. Bei ihrem Zugang habe sich nichts geändert. HBCI und Web-Zugang kann nicht getrennt gesperrt werden. Auf der Sparda Bank Seite sieht mein Zugang "normal" aus. Die Empfehlung war, alles noch einmal neu zu installieren, denn beim Anlegen einer Bankverbindung ja alle Daten automatisch geholt.
Das habe ich heute nocheinmal gemacht. Erst habe ich Jameica neu installiert und dann Hibiscus mit einem leeren Nutzerverzeichnis. Leider tritt der Fehler gleich wieder auf, direkt beim Test der Konfiguration.
Ich weiß jetzt nicht mehr weiter.

Code

[Wed Oct 12 19:06:42 CEST 2016][INFO][de.willuhn.jameica.gui.internal.parts.BackgroundTaskMonitor.check] creating progress monitor for GUI
[Wed Oct 12 19:06:42 CEST 2016][INFO][de.willuhn.jameica.gui.internal.parts.BackgroundTaskMonitor$2.run] activating progress monitor
[Wed Oct 12 19:06:42 CEST 2016][TRACE][de.willuhn.util.Session$SessionObject.<init>] added object "Image {-721085539}" to session. timeout: 1800000 millis
[Wed Oct 12 19:06:42 CEST 2016][INFO][de.willuhn.jameica.hbci.passports.pintan.server.PassportHandleImpl.open] open pin/tan passport
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.passports.pintan.server.PassportHandleImpl.open] using passport file D:\Benutzer\Karl-Heinz\.jameica\hibiscus\passports\1476291969429.pt
[Wed Oct 12 19:06:42 CEST 2016][INFO][de.willuhn.jameica.hbci.passports.pintan.server.PassportHandleImpl.open] [PIN/TAN] url         : fints.bankingonline.de/fints/FinTs30PinTanHttpGate
[Wed Oct 12 19:06:42 CEST 2016][INFO][de.willuhn.jameica.hbci.passports.pintan.server.PassportHandleImpl.open] [PIN/TAN] blz         : 55090500
[Wed Oct 12 19:06:42 CEST 2016][INFO][de.willuhn.jameica.hbci.passports.pintan.server.PassportHandleImpl.open] [PIN/TAN] filter      : Base64
[Wed Oct 12 19:06:42 CEST 2016][INFO][de.willuhn.jameica.hbci.passports.pintan.server.PassportHandleImpl.open] [PIN/TAN] HBCI version: 300
[Wed Oct 12 19:06:42 CEST 2016][INFO][de.willuhn.jameica.hbci.passports.pintan.server.PassportHandleImpl.open] [PIN/TAN] tan sec mech: null
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] registering institute
[Wed Oct 12 19:06:42 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.status] hole kreditinstituts-spezifische Daten
[Wed Oct 12 19:06:42 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.log] fetching BPD
[Wed Oct 12 19:06:42 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] creating new raw message DialogInitAnon
[Wed Oct 12 19:06:42 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting raw property DialogInitAnon.Idn.KIK.blz to "55090500"
[Wed Oct 12 19:06:42 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting raw property DialogInitAnon.Idn.KIK.country to "DE"
[Wed Oct 12 19:06:42 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting raw property DialogInitAnon.ProcPrep.BPD to "0"
[Wed Oct 12 19:06:42 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting raw property DialogInitAnon.ProcPrep.UPD to "0"
[Wed Oct 12 19:06:42 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting raw property DialogInitAnon.ProcPrep.lang to "0"
[Wed Oct 12 19:06:42 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting raw property DialogInitAnon.ProcPrep.prodName to "HBCI4Java (Hibiscus 2.6)"
[Wed Oct 12 19:06:42 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting raw property DialogInitAnon.ProcPrep.prodVersion to "2.6"
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] generating raw message DialogInitAnon
[Wed Oct 12 19:06:42 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.status] erzeuge HBCI-Nachricht DialogInitAnon
[Wed Oct 12 19:06:42 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] sending message: HNHBK:1:3+000000000126+300+0+1'HKIDN:2:2+280:55090500+9999999999+0+0'HKVVB:3:3+0+0+0+HBCI4Java (Hibiscus 2.6)+2.6'HNHBS:4:1+1'
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] communicating dialogid/msgnum 0/1
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] using filter: MIM (base64)
[Wed Oct 12 19:06:42 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.log] Verbinde mit https://fints.bankingonline.de:443/fints/FinTs30PinTanHttpGate und prüfe Zertifikat
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] using system socket factory
[Wed Oct 12 19:06:42 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.status] versende HBCI-Nachricht
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.messaging.NamedConcurrentQueue.deliver] deliver message de.willuhn.jameica.hbci.synchronize.hbci.HBCITraceMessage@151dfaff
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.synchronize.hbci.HBCITraceMessageConsumer.handleMessage] no ID to assign HBCI trace to
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] connecting to server
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] activating modified socket factory for checkCert=true and debugging=true
[Wed Oct 12 19:06:42 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] createSocket()
[Wed Oct 12 19:06:42 CEST 2016][WARN][de.willuhn.jameica.hbci.HBCICallbackSWT.log] no log.ssl.filename specified - logging to HBCI4Java logger
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.security.JameicaTrustManager.checkServerTrusted] checking server certificate via system trustmanager
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.security.JameicaTrustManager.checkServerTrusted] server certificate trusted via system trustmanager [vendor: Oracle Corporation]
[Wed Oct 12 19:06:42 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] socket log: POST /fints/FinTs30PinTanHttpGate HTTP/1.1
Content-Type: application/octet-stream
User-Agent: Java/1.8.0_74
Host: fints.bankingonline.de
Accept: text/html, image/gif, image/jpeg, *; q=.2, */*; q=.2
Connection: keep-alive
Content-Length: 168


[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] writing data to output stream
[Wed Oct 12 19:06:42 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] socket log: SE5IQks6MTozKzAwMDAwMDAwMDEyNiszMDArMCsxJ0hLSUROOjI6MisyODA6NTUwOTA1MDArOTk5OTk5OTk5OSswKzAnSEtWVkI6MzozKzArMCswK0hCQ0k0SmF2YSAoSGliaXNjdXMgMi42KSsyLjYnSE5IQlM6NDoxKzEn
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] closing output stream
[Wed Oct 12 19:06:42 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.status] warte auf Antwortdaten
[Wed Oct 12 19:06:42 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.log] warte auf Antwortdaten
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] found messagesize: 426
[Wed Oct 12 19:06:42 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] socket log: HTTP/1.1 200 OK
Date: Wed, 12 Oct 2016 17:06:44 GMT
x-tr-requestticket: AutoTicket-caxdhBHvuFcBAAAZsqHtJAoDCgQA
Content-Length: 426
X-Server: p3ih
Keep-Alive: timeout=15, max=100
Connection: Keep-Alive
Content-Type: text/plain
Set-Cookie: TS01bff4a1=0131dfe88194fd7549e7a4ce2e88e8ee2f511b5cf059cf191e8e924fa8bb6aa38eccb3b31e; Path=/

SE5IQks6MTozKzAwMDAwMDAwMDMxMSszMDAra3ExZGhCSHZ1RmNCQUFBWnNxSHRKQW9EQ2dRQSsx
K2txMWRoQkh2dUZjQkFBQVpzcUh0SkFvRENnUUE6MSdISVJNRzoyOjIrOTA1MDo6RGllIE5hY2hy
aWNodCBlbnRo5Gx0IEZlaGxlci4rOTgwMDo6RGlhbG9nIGFiZ2Vicm9jaGVuKzkwMTA6OkluaXRp
YWxpc2llcnVuZyBmZWhsZ2VzY2hsYWdlbiwgQXVmdHJhZyBuaWNodCBiZWFyYmVpdGV0Lis5MDAw
OjrcYmVydHJhZ3VuZyBkZXMgQXVmdHJhZ3MgenVtL3ZvbSBWZXJhcmJlaXR1bmdzc3lzdGVtIGZl
aGxnZXNjaGxhZ2VuLidITkhCUzozOjErMSc=
[Wed Oct 12 19:06:42 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] received 426 bytes
[Wed Oct 12 19:06:42 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] we still need 0 bytes
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] closing communication line
[Wed Oct 12 19:06:42 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] received message: HNHBK:1:3+000000000311+300+kq1dhBHvuFcBAAAZsqHtJAoDCgQA+1+kq1dhBHvuFcBAAAZsqHtJAoDCgQA:1'HIRMG:2:2+9050::Die Nachricht enthält Fehler.+9800::Dialog abgebrochen+9010::Initialisierung fehlgeschlagen, Auftrag nicht bearbeitet.+9000::Übertragung des Auftrags zum/vom Verarbeitungssystem fehlgeschlagen.'HNHBS:3:1+1'
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.messaging.NamedConcurrentQueue.deliver] deliver message de.willuhn.jameica.hbci.synchronize.hbci.HBCITraceMessage@11226c84
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.synchronize.hbci.HBCITraceMessageConsumer.handleMessage] no ID to assign HBCI trace to
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.AbstractHibiscusHBCICallback.status] parse empfangene Antwortnachricht (CryptedRes)
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] trying to parse message as crypted message
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] message seems not to be encrypted; tring to parse it as DialogInitAnonRes message
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.AbstractHibiscusHBCICallback.status] parse empfangene Antwortnachricht (DialogInitAnonRes)
[Wed Oct 12 19:06:42 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] received message after decryption: HNHBK:1:3+000000000311+300+kq1dhBHvuFcBAAAZsqHtJAoDCgQA+1+kq1dhBHvuFcBAAAZsqHtJAoDCgQA:1'HIRMG:2:2+9050::Die Nachricht enthält Fehler.+9800::Dialog abgebrochen+9010::Initialisierung fehlgeschlagen, Auftrag nicht bearbeitet.+9000::Übertragung des Auftrags zum/vom Verarbeitungssystem fehlgeschlagen.'HNHBS:3:1+1'
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] extracting data from received message
[Wed Oct 12 19:06:42 CEST 2016][ERROR][de.willuhn.jameica.hbci.HBCICallbackSWT.log] HBCI error code: 9050:Die Nachricht enthält Fehler. org.kapott.hbci.status.HBCIStatus.addRetVal(HBCIStatus.java:72)
[Wed Oct 12 19:06:42 CEST 2016][ERROR][de.willuhn.jameica.hbci.HBCICallbackSWT.log] HBCI error code: 9800:Dialog abgebrochen org.kapott.hbci.status.HBCIStatus.addRetVal(HBCIStatus.java:72)
[Wed Oct 12 19:06:42 CEST 2016][ERROR][de.willuhn.jameica.hbci.HBCICallbackSWT.log] HBCI error code: 9010:Initialisierung fehlgeschlagen, Auftrag nicht bearbeitet. org.kapott.hbci.status.HBCIStatus.addRetVal(HBCIStatus.java:72)
[Wed Oct 12 19:06:42 CEST 2016][ERROR][de.willuhn.jameica.hbci.HBCICallbackSWT.log] HBCI error code: 9000:Übertragung des Auftrags zum/vom Verarbeitungssystem fehlgeschlagen. org.kapott.hbci.status.HBCIStatus.addRetVal(HBCIStatus.java:72)
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] looking for a signature
[Wed Oct 12 19:06:42 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.status] überprüfe Signatur der Antwortnachricht
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] message does not need a signature
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] looking if message is encrypted
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] dialog init ended with errors - searching for return code 'wrong PIN'
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] autosecfunc: search for 3920s in response to detect allowed twostep secmechs
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] extracting BPD from results
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] writing to passport file D:\Benutzer\Karl-Heinz\.jameica\hibiscus\passports\1476291969429.pt_3518725326107750905
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] saving two step mechs: []
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] autosecfunc: (re)checking selected pintan secmech
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] autosecfunc: there is only one pintan method (999) supported - choosing this automatically
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] saving current tan method: 999
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] closing output stream
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] saving passport file D:\Benutzer\Karl-Heinz\.jameica\hibiscus\passports\1476291969429.pt
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] deleting old passport file D:\Benutzer\Karl-Heinz\.jameica\hibiscus\passports\1476291969429.pt
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] renaming 1476291969429.pt_3518725326107750905 to 1476291969429.pt
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] new passport file now exists: D:\Benutzer\Karl-Heinz\.jameica\hibiscus\passports\1476291969429.pt
[Wed Oct 12 19:06:42 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.status] beende Dialog
[Wed Oct 12 19:06:42 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] creating new raw message DialogEndAnon
[Wed Oct 12 19:06:42 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting raw property DialogEndAnon.MsgHead.dialogid to "kq1dhBHvuFcBAAAZsqHtJAoDCgQA"
[Wed Oct 12 19:06:42 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting raw property DialogEndAnon.MsgHead.msgnum to "2"
[Wed Oct 12 19:06:42 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting raw property DialogEndAnon.DialogEndS.dialogid to "kq1dhBHvuFcBAAAZsqHtJAoDCgQA"
[Wed Oct 12 19:06:42 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting raw property DialogEndAnon.MsgTail.msgnum to "2"
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] generating raw message DialogEndAnon
[Wed Oct 12 19:06:42 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.status] erzeuge HBCI-Nachricht DialogEndAnon
[Wed Oct 12 19:06:42 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] sending message: HNHBK:1:3+000000000109+300+kq1dhBHvuFcBAAAZsqHtJAoDCgQA+2'HKEND:2:1+kq1dhBHvuFcBAAAZsqHtJAoDCgQA'HNHBS:3:1+2'
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] communicating dialogid/msgnum kq1dhBHvuFcBAAAZsqHtJAoDCgQA/2
[Wed Oct 12 19:06:42 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.status] versende HBCI-Nachricht
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.messaging.NamedConcurrentQueue.deliver] deliver message de.willuhn.jameica.hbci.synchronize.hbci.HBCITraceMessage@5420f0c4
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.synchronize.hbci.HBCITraceMessageConsumer.handleMessage] no ID to assign HBCI trace to
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] connecting to server
[Wed Oct 12 19:06:42 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] activating modified socket factory for checkCert=true and debugging=true
[Wed Oct 12 19:06:42 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] createSocket()
[Wed Oct 12 19:06:42 CEST 2016][WARN][de.willuhn.jameica.hbci.HBCICallbackSWT.log] no log.ssl.filename specified - logging to HBCI4Java logger
[Wed Oct 12 19:06:43 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] socket log: POST /fints/FinTs30PinTanHttpGate HTTP/1.1
Content-Type: application/octet-stream
User-Agent: Java/1.8.0_74
Host: fints.bankingonline.de
Accept: text/html, image/gif, image/jpeg, *; q=.2, */*; q=.2
Connection: keep-alive
Content-Length: 148


[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] writing data to output stream
[Wed Oct 12 19:06:43 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] socket log: SE5IQks6MTozKzAwMDAwMDAwMDEwOSszMDAra3ExZGhCSHZ1RmNCQUFBWnNxSHRKQW9EQ2dRQSsyJ0hLRU5EOjI6MStrcTFkaEJIdnVGY0JBQUFac3FIdEpBb0RDZ1FBJ0hOSEJTOjM6MSsyJw==
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] closing output stream
[Wed Oct 12 19:06:43 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.status] warte auf Antwortdaten
[Wed Oct 12 19:06:43 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.log] warte auf Antwortdaten
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] found messagesize: 274
[Wed Oct 12 19:06:43 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] socket log: HTTP/1.1 200 OK
Date: Wed, 12 Oct 2016 17:06:45 GMT
x-tr-requestticket: AutoTicket-8K9dhBHvuFcBAAAZsqHtJAoDCgQA
Content-Length: 274
X-Server: p3ih
Keep-Alive: timeout=15, max=99
Connection: Keep-Alive
Content-Type: text/plain
Set-Cookie: TS01bff4a1=0131dfe881553142b29e1c109485e9416a10938ec76018e20cac039c4cbbd08778e6d0220c; Path=/

SE5IQks6MTozKzAwMDAwMDAwMDE5OSszMDAra3ExZGhCSHZ1RmNCQUFBWnNxSHRKQW9EQ2dRQSsy
K2txMWRoQkh2dUZjQkFBQVpzcUh0SkFvRENnUUE6MidISVJNRzoyOjIrOTA1MDo6RGllIE5hY2hy
aWNodCBlbnRo5Gx0IEZlaGxlci4rOTAxMDo6RGllIGFuZ2VnZWJlbmUgQmFua3JlZmVyZW56IGlz
dCBuaWNodCBn/Gx0aWcuJ0hOSEJTOjM6MSsxJw==
[Wed Oct 12 19:06:43 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] received 274 bytes
[Wed Oct 12 19:06:43 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] we still need 0 bytes
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] closing communication line
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.messaging.NamedConcurrentQueue.deliver] deliver message de.willuhn.jameica.hbci.synchronize.hbci.HBCITraceMessage@1f0ea813
[Wed Oct 12 19:06:43 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] received message: HNHBK:1:3+000000000199+300+kq1dhBHvuFcBAAAZsqHtJAoDCgQA+2+kq1dhBHvuFcBAAAZsqHtJAoDCgQA:2'HIRMG:2:2+9050::Die Nachricht enthält Fehler.+9010::Die angegebene Bankreferenz ist nicht gültig.'HNHBS:3:1+1'
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.synchronize.hbci.HBCITraceMessageConsumer.handleMessage] no ID to assign HBCI trace to
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.AbstractHibiscusHBCICallback.status] parse empfangene Antwortnachricht (CryptedRes)
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] trying to parse message as crypted message
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] message seems not to be encrypted; tring to parse it as DialogEndAnonRes message
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.AbstractHibiscusHBCICallback.status] parse empfangene Antwortnachricht (DialogEndAnonRes)
[Wed Oct 12 19:06:43 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] received message after decryption: HNHBK:1:3+000000000199+300+kq1dhBHvuFcBAAAZsqHtJAoDCgQA+2+kq1dhBHvuFcBAAAZsqHtJAoDCgQA:2'HIRMG:2:2+9050::Die Nachricht enthält Fehler.+9010::Die angegebene Bankreferenz ist nicht gültig.'HNHBS:3:1+1'
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] extracting data from received message
[Wed Oct 12 19:06:43 CEST 2016][ERROR][de.willuhn.jameica.hbci.HBCICallbackSWT.log] HBCI error code: 9050:Die Nachricht enthält Fehler. org.kapott.hbci.status.HBCIStatus.addRetVal(HBCIStatus.java:72)
[Wed Oct 12 19:06:43 CEST 2016][ERROR][de.willuhn.jameica.hbci.HBCICallbackSWT.log] HBCI error code: 9010:Die angegebene Bankreferenz ist nicht gültig. org.kapott.hbci.status.HBCIStatus.addRetVal(HBCIStatus.java:72)
[Wed Oct 12 19:06:43 CEST 2016][ERROR][de.willuhn.jameica.hbci.HBCICallbackSWT.log] org.kapott.hbci.exceptions.HBCI_Exception: empfangene Nachrichtennummer (1) im Nachrichtenende entspricht nicht der gesendeten Nachrichtennummer (2)
  at org.kapott.hbci.manager.HBCIKernelImpl.rawDoIt(HBCIKernelImpl.java:430)
  at org.kapott.hbci.manager.HBCIKernelImpl.rawDoIt(HBCIKernelImpl.java:178)
  at org.kapott.hbci.manager.HBCIInstitute.doDialogEnd(HBCIInstitute.java:189)
  at org.kapott.hbci.manager.HBCIInstitute.fetchBPD(HBCIInstitute.java:328)
  at org.kapott.hbci.manager.HBCIInstitute.register(HBCIInstitute.java:451)
  at org.kapott.hbci.manager.HBCIHandler.registerInstitute(HBCIHandler.java:268)
  at org.kapott.hbci.manager.HBCIHandler.<init>(HBCIHandler.java:132)
  at de.willuhn.jameica.hbci.passports.pintan.server.PassportHandleImpl.open(PassportHandleImpl.java:175)
  at de.willuhn.jameica.hbci.gui.action.PassportTest$1.run(PassportTest.java:80)
  at de.willuhn.jameica.gui.GUI$7.run(GUI.java:1057) org.kapott.hbci.manager.HBCIUtils.log(HBCIUtils.java:1230)
[Wed Oct 12 19:06:43 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.status] Dialog beendet
[Wed Oct 12 19:06:43 CEST 2016][ERROR][de.willuhn.jameica.hbci.HBCICallbackSWT.log] dialog end failed: org.kapott.hbci.exceptions.HBCI_Exception: empfangene Nachrichtennummer (1) im Nachrichtenende entspricht nicht der gesendeten Nachrichtennummer (2)
9050:Die Nachricht enthält Fehler.
9010:Die angegebene Bankreferenz ist nicht gültig. org.kapott.hbci.manager.HBCIInstitute.doDialogEnd(HBCIInstitute.java:193)
[Wed Oct 12 19:06:43 CEST 2016][ERROR][de.willuhn.jameica.hbci.HBCICallbackSWT.log] org.kapott.hbci.exceptions.ProcessException: Dialog-Ende fehlgeschlagen
  at org.kapott.hbci.manager.HBCIInstitute.doDialogEnd(HBCIInstitute.java:198)
  at org.kapott.hbci.manager.HBCIInstitute.fetchBPD(HBCIInstitute.java:328)
  at org.kapott.hbci.manager.HBCIInstitute.register(HBCIInstitute.java:451)
  at org.kapott.hbci.manager.HBCIHandler.registerInstitute(HBCIHandler.java:268)
  at org.kapott.hbci.manager.HBCIHandler.<init>(HBCIHandler.java:132)
  at de.willuhn.jameica.hbci.passports.pintan.server.PassportHandleImpl.open(PassportHandleImpl.java:175)
  at de.willuhn.jameica.hbci.gui.action.PassportTest$1.run(PassportTest.java:80)
  at de.willuhn.jameica.gui.GUI$7.run(GUI.java:1057) org.kapott.hbci.manager.HBCIUtils.log(HBCIUtils.java:1230)
[Wed Oct 12 19:06:43 CEST 2016][ERROR][de.willuhn.jameica.hbci.HBCICallbackSWT.log] fetching BPD failed: 9050:Die Nachricht enthält Fehler.
9800:Dialog abgebrochen
9010:Initialisierung fehlgeschlagen, Auftrag nicht bearbeitet.
9000:Übertragung des Auftrags zum/vom Verarbeitungssystem fehlgeschlagen. org.kapott.hbci.manager.HBCIInstitute.fetchBPD(HBCIInstitute.java:334)
[Wed Oct 12 19:06:43 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.log] org.kapott.hbci.exceptions.ProcessException: Abholen der BPD fehlgeschlagen
  at org.kapott.hbci.manager.HBCIInstitute.fetchBPD(HBCIInstitute.java:335)
  at org.kapott.hbci.manager.HBCIInstitute.register(HBCIInstitute.java:451)
  at org.kapott.hbci.manager.HBCIHandler.registerInstitute(HBCIHandler.java:268)
  at org.kapott.hbci.manager.HBCIHandler.<init>(HBCIHandler.java:132)
  at de.willuhn.jameica.hbci.passports.pintan.server.PassportHandleImpl.open(PassportHandleImpl.java:175)
  at de.willuhn.jameica.hbci.gui.action.PassportTest$1.run(PassportTest.java:80)
  at de.willuhn.jameica.gui.GUI$7.run(GUI.java:1057)
[Wed Oct 12 19:06:43 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.log] FAILED! - maybe this institute does not support anonymous logins
[Wed Oct 12 19:06:43 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.log] we will nevertheless go on
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] checking if requested hbci parameters are supported
[Wed Oct 12 19:06:43 CEST 2016][WARN][de.willuhn.jameica.hbci.HBCICallbackSWT.log] can not check if requested parameters are supported
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] registering user
[Wed Oct 12 19:06:43 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.status] hole neue System-ID
[Wed Oct 12 19:06:43 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.log] fetching new sys-id from institute
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] checking whether passport is supported (but ignoring result)
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] passport supported: true
[Wed Oct 12 19:06:43 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] creating new raw message Synch
[Wed Oct 12 19:06:43 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting raw property Synch.Idn.KIK.blz to "55090500"
[Wed Oct 12 19:06:43 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting raw property Synch.Idn.KIK.country to "DE"
[Wed Oct 12 19:06:43 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting raw property Synch.Idn.customerid to "XXXXXX"
[Wed Oct 12 19:06:43 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting raw property Synch.Idn.sysid to "0"
[Wed Oct 12 19:06:43 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting raw property Synch.Idn.sysStatus to "1"
[Wed Oct 12 19:06:43 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting raw property Synch.MsgHead.dialogid to "0"
[Wed Oct 12 19:06:43 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting raw property Synch.MsgHead.msgnum to "1"
[Wed Oct 12 19:06:43 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting raw property Synch.MsgTail.msgnum to "1"
[Wed Oct 12 19:06:43 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting raw property Synch.ProcPrep.BPD to "0"
[Wed Oct 12 19:06:43 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting raw property Synch.ProcPrep.UPD to "0"
[Wed Oct 12 19:06:43 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting raw property Synch.ProcPrep.lang to "0"
[Wed Oct 12 19:06:43 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting raw property Synch.ProcPrep.prodName to "HBCI4Java (Hibiscus 2.6)"
[Wed Oct 12 19:06:43 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting raw property Synch.ProcPrep.prodVersion to "2.6"
[Wed Oct 12 19:06:43 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting raw property Synch.Sync.mode to "0"
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] generating raw message Synch
[Wed Oct 12 19:06:43 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.status] erzeuge HBCI-Nachricht Synch
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] trying to insert signature
[Wed Oct 12 19:06:43 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.status] signiere HBCI-Nachricht
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting secfunc to 999
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting cid to 
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting role to 1
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting range to 1
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting keyblz to 55090500
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting keycountry to DE
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting keyuserid to XXXXXXXXX
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting keynum to 0
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting keyversion to 0
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting sysid to 0
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting sigid to 1
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting sigalg to 10
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting sigmode to 16
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting hashalg to 999
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] writing to passport file D:\Benutzer\Karl-Heinz\.jameica\hibiscus\passports\1476291969429.pt_4467147291476653085
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] saving two step mechs: []
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] saving current tan method: 999
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] closing output stream
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] saving passport file D:\Benutzer\Karl-Heinz\.jameica\hibiscus\passports\1476291969429.pt
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] deleting old passport file D:\Benutzer\Karl-Heinz\.jameica\hibiscus\passports\1476291969429.pt
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] renaming 1476291969429.pt_4467147291476653085 to 1476291969429.pt
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] new passport file now exists: D:\Benutzer\Karl-Heinz\.jameica\hibiscus\passports\1476291969429.pt
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.hbci.gui.DialogFactory.getCacheKey] using cache key: hibiscus.pin.D:\Benutzer\Karl-Heinz\.jameica\hibiscus\passports\1476291969429.pt
[Wed Oct 12 19:06:43 CEST 2016][TRACE][de.willuhn.jameica.services.BeanService.get] searching for bean HBCISynchronizeBackend
[Wed Oct 12 19:06:43 CEST 2016][TRACE][de.willuhn.jameica.services.BeanService.get]   found in context scope
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.gui.dialogs.AbstractDialog$1.run] modal type: primary
[Wed Oct 12 19:06:43 CEST 2016][DEBUG][de.willuhn.jameica.gui.dialogs.AbstractDialog$4.run] using custom dialog size: 733x-1
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.gui.dialogs.AbstractDialog.close] closing dialog
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.gui.dialogs.AbstractDialog$5.run] dialog closed
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.gui.dialogs.AbstractDialog.close] notifying listeners
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.gui.DialogFactory.getCacheKey] using cache key: hibiscus.pin.D:\Benutzer\Karl-Heinz\.jameica\hibiscus\passports\1476291969429.pt
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.security.crypto.RSAEngine.encrypt] creating cipher
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.security.crypto.RSAEngine.encrypt] encrypting data
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.security.crypto.RSAEngine.encrypt] using block size (in bytes): 255
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.callback] callback [reason 16] handled by class de.willuhn.jameica.hbci.passports.pintan.server.PassportHandleImpl
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] onestep method - checking GVs to decide whether or not we need a TAN
[Wed Oct 12 19:06:47 CEST 2016][WARN][de.willuhn.jameica.hbci.HBCICallbackSWT.log] the job with the code HNSHK seems not to be allowed with PIN/TAN
[Wed Oct 12 19:06:47 CEST 2016][WARN][de.willuhn.jameica.hbci.HBCICallbackSWT.log] the job with the code HKIDN seems not to be allowed with PIN/TAN
[Wed Oct 12 19:06:47 CEST 2016][WARN][de.willuhn.jameica.hbci.HBCICallbackSWT.log] the job with the code HKVVB seems not to be allowed with PIN/TAN
[Wed Oct 12 19:06:47 CEST 2016][WARN][de.willuhn.jameica.hbci.HBCICallbackSWT.log] the job with the code HKSYN seems not to be allowed with PIN/TAN
[Wed Oct 12 19:06:47 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] sending message: HNHBK:1:3+000000000268+300+0+1'HNSHK:2:4+PIN:1+999+1144235372+1+1+1::0+1+1:20161012:190643+1:999:1+6:10:16+280:55090500:XXXXXXXXX:S:0:0'HKIDN:3:2+280:55090500+XXXXXX+0+1'HKVVB:4:3+0+0+0+HBCI4Java (Hibiscus 2.6)+2.6'HKSYN:5:3+0'HNSHA:6:2+1144235372++XXXXXX'HNHBS:7:1+1'
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] trying to encrypt message
[Wed Oct 12 19:06:47 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.status] verschlüssele HBCI-Nachricht
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] creating new crypt factory
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] checking if crypt available in pool
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] no, creating new crypt
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] adding to used pool
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] crypt acquired
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting secfunc to 998
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting keytype to 5
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting blz to 55090500
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting country to DE
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting keyuserid to XXXXXXXXX
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting keynum to 0
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting keyversion to 0
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting cid to 
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting sysId to 0
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting role to 1
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting alg to 13
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting mode to 2
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] setting compfunc to 0
[Wed Oct 12 19:06:47 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] encrypted message to be sent: HNHBK:1:3+000000000387+300+0+1'HNVSK:998:3+PIN:1+998+1+1::0+1:20161012:190647+2:2:13:@8@        :5:1+280:55090500:XXXXXXXXX:V:0:0+0'HNVSD:999:1+@225@HNSHK:2:4+PIN:1+999+1144235372+1+1+1::0+1+1:20161012:190643+1:999:1+6:10:16+280:55090500:XXXXXXXXX:S:0:0'HKIDN:3:2+280:55090500+XXXXXX+0+1'HKVVB:4:3+0+0+0+HBCI4Java (Hibiscus 2.6)+2.6'HKSYN:5:3+0'HNSHA:6:2+1144235372++XXXXXX''HNHBS:7:1+1'
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] communicating dialogid/msgnum 0/1
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] using filter: MIM (base64)
[Wed Oct 12 19:06:47 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.log] Verbinde mit https://fints.bankingonline.de:443/fints/FinTs30PinTanHttpGate und prüfe Zertifikat
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] using system socket factory
[Wed Oct 12 19:06:47 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.status] versende HBCI-Nachricht
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] connecting to server
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] activating modified socket factory for checkCert=true and debugging=true
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.messaging.NamedConcurrentQueue.deliver] deliver message de.willuhn.jameica.hbci.synchronize.hbci.HBCITraceMessage@65be630f
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.synchronize.hbci.HBCITraceMessageConsumer.handleMessage] no ID to assign HBCI trace to
[Wed Oct 12 19:06:47 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] createSocket()
[Wed Oct 12 19:06:47 CEST 2016][WARN][de.willuhn.jameica.hbci.HBCICallbackSWT.log] no log.ssl.filename specified - logging to HBCI4Java logger
[Wed Oct 12 19:06:47 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] socket log: POST /fints/FinTs30PinTanHttpGate HTTP/1.1
Content-Type: application/octet-stream
User-Agent: Java/1.8.0_74
Host: fints.bankingonline.de
Accept: text/html, image/gif, image/jpeg, *; q=.2, */*; q=.2
Connection: keep-alive
Content-Length: 516


[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] writing data to output stream
[Wed Oct 12 19:06:47 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] socket log: 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
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] closing output stream
[Wed Oct 12 19:06:47 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.status] warte auf Antwortdaten
[Wed Oct 12 19:06:47 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.log] warte auf Antwortdaten
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] found messagesize: 294
[Wed Oct 12 19:06:47 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] socket log: HTTP/1.1 200 OK
Date: Wed, 12 Oct 2016 17:06:49 GMT
x-tr-requestticket: AutoTicket-Y79dhBHvuFcBAAAZsqHtJAoDCgQA
Content-Length: 294
X-Server: p3ih
Keep-Alive: timeout=15, max=98
Connection: Keep-Alive
Content-Type: text/plain
Set-Cookie: TS01bff4a1=0131dfe8816c2de432c690a0837e557b3514e7d39d3595b00cfe960e78dc502f617512f9b3; Path=/

SE5IQks6MTozKzAwMDAwMDAwMDIxNiszMDArRGNCZGhCSHZ1RmNCQUFBWnNxSHRKQW9EQ2dRQSsx
K0RjQmRoQkh2dUZjQkFBQVpzcUh0SkFvRENnUUE6MSdISVJNRzoyOjIrOTA1MDo6RGllIE5hY2hy
aWNodCBlbnRo5Gx0IEZlaGxlci4rOTgwMDo6RGlhbG9nIGFiZ2Vicm9jaGVuKzkzNDA6OlVuYmVr
YW5udGUgb2RlciB1bnp1bORzc2lnZSBTaWduYXR1ci4nSE5IQlM6MzoxKzEn
[Wed Oct 12 19:06:47 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] received 294 bytes
[Wed Oct 12 19:06:47 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] we still need 0 bytes
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] closing communication line
[Wed Oct 12 19:06:47 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] received message: HNHBK:1:3+000000000216+300+DcBdhBHvuFcBAAAZsqHtJAoDCgQA+1+DcBdhBHvuFcBAAAZsqHtJAoDCgQA:1'HIRMG:2:2+9050::Die Nachricht enthält Fehler.+9800::Dialog abgebrochen+9340::Unbekannte oder unzulässige Signatur.'HNHBS:3:1+1'
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.AbstractHibiscusHBCICallback.status] parse empfangene Antwortnachricht (CryptedRes)
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] trying to parse message as crypted message
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] message seems not to be encrypted; tring to parse it as SynchRes message
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.AbstractHibiscusHBCICallback.status] parse empfangene Antwortnachricht (SynchRes)
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.messaging.NamedConcurrentQueue.deliver] deliver message de.willuhn.jameica.hbci.synchronize.hbci.HBCITraceMessage@677a6570
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.synchronize.hbci.HBCITraceMessageConsumer.handleMessage] no ID to assign HBCI trace to
[Wed Oct 12 19:06:47 CEST 2016][TRACE][de.willuhn.jameica.hbci.HBCICallbackSWT.log] received message after decryption: HNHBK:1:3+000000000216+300+DcBdhBHvuFcBAAAZsqHtJAoDCgQA+1+DcBdhBHvuFcBAAAZsqHtJAoDCgQA:1'HIRMG:2:2+9050::Die Nachricht enthält Fehler.+9800::Dialog abgebrochen+9340::Unbekannte oder unzulässige Signatur.'HNHBS:3:1+1'
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] extracting data from received message
[Wed Oct 12 19:06:47 CEST 2016][ERROR][de.willuhn.jameica.hbci.HBCICallbackSWT.log] HBCI error code: 9050:Die Nachricht enthält Fehler. org.kapott.hbci.status.HBCIStatus.addRetVal(HBCIStatus.java:72)
[Wed Oct 12 19:06:47 CEST 2016][ERROR][de.willuhn.jameica.hbci.HBCICallbackSWT.log] HBCI error code: 9800:Dialog abgebrochen org.kapott.hbci.status.HBCIStatus.addRetVal(HBCIStatus.java:72)
[Wed Oct 12 19:06:47 CEST 2016][ERROR][de.willuhn.jameica.hbci.HBCICallbackSWT.log] HBCI error code: 9340:Unbekannte oder unzulässige Signatur. org.kapott.hbci.status.HBCIStatus.addRetVal(HBCIStatus.java:72)
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] looking for a signature
[Wed Oct 12 19:06:47 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.status] überprüfe Signatur der Antwortnachricht
[Wed Oct 12 19:06:47 CEST 2016][WARN][de.willuhn.jameica.hbci.HBCICallbackSWT.log] message has no signature
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] looking if message is encrypted
[Wed Oct 12 19:06:47 CEST 2016][ERROR][de.willuhn.jameica.hbci.HBCICallbackSWT.log] org.kapott.hbci.exceptions.HBCI_Exception: Nachricht ist nicht verschlüsselt
  at org.kapott.hbci.manager.HBCIKernelImpl.rawDoIt(HBCIKernelImpl.java:462)
  at org.kapott.hbci.manager.HBCIKernelImpl.rawDoIt(HBCIKernelImpl.java:178)
  at org.kapott.hbci.manager.HBCIUser.fetchSysId(HBCIUser.java:442)
  at org.kapott.hbci.manager.HBCIUser.updateUserData(HBCIUser.java:665)
  at org.kapott.hbci.manager.HBCIUser.register(HBCIUser.java:690)
  at org.kapott.hbci.manager.HBCIHandler.registerUser(HBCIHandler.java:279)
  at org.kapott.hbci.manager.HBCIHandler.<init>(HBCIHandler.java:133)
  at de.willuhn.jameica.hbci.passports.pintan.server.PassportHandleImpl.open(PassportHandleImpl.java:175)
  at de.willuhn.jameica.hbci.gui.action.PassportTest$1.run(PassportTest.java:80)
  at de.willuhn.jameica.gui.GUI$7.run(GUI.java:1057) org.kapott.hbci.manager.HBCIUtils.log(HBCIUtils.java:1230)
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] dialog init ended with errors - searching for return code 'wrong PIN'
[Wed Oct 12 19:06:47 CEST 2016][INFO][de.willuhn.jameica.hbci.HBCICallbackSWT.log] detected 'invalid PIN' error - clearing passport PIN
[Wed Oct 12 19:06:47 CEST 2016][ERROR][de.willuhn.jameica.hbci.HBCICallbackSWT.callback] detected wrong PIN: *** invalid PIN entered []: 
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] autosecfunc: search for 3920s in response to detect allowed twostep secmechs
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] autosecfunc: (re)checking selected pintan secmech
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.HBCICallbackSWT.log] autosecfunc: there is only one pintan method (999) supported - choosing this automatically
[Wed Oct 12 19:06:47 CEST 2016][INFO][de.willuhn.jameica.hbci.gui.action.PassportProcessCode3072.handleAction] no changed customer data in persistent data of passport found
[Wed Oct 12 19:06:47 CEST 2016][INFO][de.willuhn.jameica.hbci.passports.pintan.server.PassportHandleImpl.close] closing pin/tan passport
[Wed Oct 12 19:06:47 CEST 2016][INFO][de.willuhn.jameica.hbci.passports.pintan.server.PassportHandleImpl.close] pin/tan passport closed
[Wed Oct 12 19:06:47 CEST 2016][ERROR][de.willuhn.jameica.hbci.passports.pintan.server.PassportHandleImpl.open] error while opening pin/tan passport
org.kapott.hbci.exceptions.HBCI_Exception: Fehler beim Erzeugen eines HBCIHandler Objektes
  at org.kapott.hbci.manager.HBCIHandler.<init>(HBCIHandler.java:142)
  at de.willuhn.jameica.hbci.passports.pintan.server.PassportHandleImpl.open(PassportHandleImpl.java:175)
  at de.willuhn.jameica.hbci.gui.action.PassportTest$1.run(PassportTest.java:80)
  at de.willuhn.jameica.gui.GUI$7.run(GUI.java:1057)
Caused by: org.kapott.hbci.exceptions.HBCI_Exception: Fehler beim Registrieren der Nutzerdaten
  at org.kapott.hbci.manager.HBCIHandler.registerUser(HBCIHandler.java:281)
  at org.kapott.hbci.manager.HBCIHandler.<init>(HBCIHandler.java:133)
  ... 3 more
Caused by: org.kapott.hbci.exceptions.HBCI_Exception: Fehler beim Ermitteln einer neuen System-ID
  at org.kapott.hbci.manager.HBCIUser.fetchSysId(HBCIUser.java:474)
  at org.kapott.hbci.manager.HBCIUser.updateUserData(HBCIUser.java:665)
  at org.kapott.hbci.manager.HBCIUser.register(HBCIUser.java:690)
  at org.kapott.hbci.manager.HBCIHandler.registerUser(HBCIHandler.java:279)
  ... 4 more
Caused by: org.kapott.hbci.exceptions.ProcessException: Fehler beim Ermitteln einer neuen System-ID
  at org.kapott.hbci.manager.HBCIUser.fetchSysId(HBCIUser.java:461)
  ... 7 more

[Wed Oct 12 19:06:47 CEST 2016][INFO][de.willuhn.jameica.hbci.gui.action.PassportTest$1.run] test of passport failed: class org.kapott.hbci.exceptions.ProcessException: Fehler beim Ermitteln einer neuen System-ID
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.hbci.gui.action.PassportTest$1.run] error while testing passport
java.rmi.RemoteException: error while opening pin/tan passport; nested exception is: 
  org.kapott.hbci.exceptions.HBCI_Exception: Fehler beim Erzeugen eines HBCIHandler Objektes
  at de.willuhn.jameica.hbci.passports.pintan.server.PassportHandleImpl.open(PassportHandleImpl.java:192)
  at de.willuhn.jameica.hbci.gui.action.PassportTest$1.run(PassportTest.java:80)
  at de.willuhn.jameica.gui.GUI$7.run(GUI.java:1057)
Caused by: org.kapott.hbci.exceptions.HBCI_Exception: Fehler beim Erzeugen eines HBCIHandler Objektes
  at org.kapott.hbci.manager.HBCIHandler.<init>(HBCIHandler.java:142)
  at de.willuhn.jameica.hbci.passports.pintan.server.PassportHandleImpl.open(PassportHandleImpl.java:175)
  ... 2 more
Caused by: org.kapott.hbci.exceptions.HBCI_Exception: Fehler beim Registrieren der Nutzerdaten
  at org.kapott.hbci.manager.HBCIHandler.registerUser(HBCIHandler.java:281)
  at org.kapott.hbci.manager.HBCIHandler.<init>(HBCIHandler.java:133)
  ... 3 more
Caused by: org.kapott.hbci.exceptions.HBCI_Exception: Fehler beim Ermitteln einer neuen System-ID
  at org.kapott.hbci.manager.HBCIUser.fetchSysId(HBCIUser.java:474)
  at org.kapott.hbci.manager.HBCIUser.updateUserData(HBCIUser.java:665)
  at org.kapott.hbci.manager.HBCIUser.register(HBCIUser.java:690)
  at org.kapott.hbci.manager.HBCIHandler.registerUser(HBCIHandler.java:279)
  ... 4 more
Caused by: org.kapott.hbci.exceptions.ProcessException: Fehler beim Ermitteln einer neuen System-ID
  at org.kapott.hbci.manager.HBCIUser.fetchSysId(HBCIUser.java:461)
  ... 7 more

[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.security.Wallet.write] writing wallet file D:\Benutzer\Karl-Heinz\.jameica\cfg/de.willuhn.jameica.hbci.HBCI.wallet2 via RSAEngine
[Wed Oct 12 19:06:47 CEST 2016][DEBUG][de.willuhn.jameica.security.Wallet.write] serializing wallet
[Wed Oct 12 19:06:48 CEST 2016][DEBUG][de.willuhn.jameica.security.crypto.RSAEngine.encrypt] creating cipher
[Wed Oct 12 19:06:48 CEST 2016][DEBUG][de.willuhn.jameica.security.crypto.RSAEngine.encrypt] encrypting data
[Wed Oct 12 19:06:48 CEST 2016][DEBUG][de.willuhn.jameica.security.crypto.RSAEngine.encrypt] using block size (in bytes): 255
[Wed Oct 12 19:06:48 CEST 2016][DEBUG][de.willuhn.jameica.security.Wallet.write] test if readable
[Wed Oct 12 19:06:48 CEST 2016][DEBUG][de.willuhn.jameica.security.Wallet.read] reading wallet file D:\Benutzer\Karl-Heinz\.jameica\cfg\de.willuhn.jameica.hbci.HBCI.wallet2_3055130665506498968 via RSAEngine
[Wed Oct 12 19:06:48 CEST 2016][DEBUG][de.willuhn.jameica.security.crypto.RSAEngine.decrypt] creating cipher
[Wed Oct 12 19:06:48 CEST 2016][DEBUG][de.willuhn.jameica.security.crypto.RSAEngine.decrypt] using block size (in bytes): 256
[Wed Oct 12 19:06:48 CEST 2016][DEBUG][de.willuhn.jameica.security.crypto.RSAEngine.decrypt] decrypting data
[Wed Oct 12 19:06:48 CEST 2016][DEBUG][de.willuhn.jameica.security.Wallet.read] deserializing wallet
[Wed Oct 12 19:06:48 CEST 2016][DEBUG][de.willuhn.jameica.security.Wallet.read] reading wallet done
[Wed Oct 12 19:06:48 CEST 2016][DEBUG][de.willuhn.jameica.security.Wallet.write] renaming temp file
[Wed Oct 12 19:06:48 CEST 2016][DEBUG][de.willuhn.jameica.security.Wallet.write] writing wallet done
[Wed Oct 12 19:06:48 CEST 2016][DEBUG][de.willuhn.jameica.messaging.NamedConcurrentQueue.deliver] deliver message [Wed Oct 12 19:06:48 CEST 2016][ERROR] Fehler beim Testen des Sicherheits-Mediums: Fehler beim Ermitteln einer neuen System-ID
[Wed Oct 12 19:06:48 CEST 2016][INFO][de.willuhn.jameica.hbci.gui.action.PassportTest$2.run] log target removed
[Wed Oct 12 19:06:48 CEST 2016][TRACE][de.willuhn.util.Session$SessionObject.<init>] added object "Image {-1509617717}" to session. timeout: 1800000 millis
[Wed Oct 12 19:07:18 CEST 2016][INFO][de.willuhn.jameica.gui.internal.parts.BackgroundTaskMonitor$
hibiscus
Benutzer
Avatar
Geschlecht: keine Angabe
Herkunft: Leipzig
Homepage: willuhn.de/
Beiträge: 11351
Dabei seit: 03 / 2005
Betreff:

Re: Zugang Sparda Bank

 · 
Gepostet: 12.10.2016 - 19:31 Uhr  ·  #12
Die Bank sendet nach wie vor "9340:Unbekannte oder unzulässige Signatur".
Ich habe keine Ahnung, was genau die Bank da bemängelt.
msa
Benutzer
Avatar
Geschlecht:
Herkunft: München
Alter: 63
Beiträge: 7571
Dabei seit: 03 / 2007
Betreff:

Re: Zugang Sparda Bank

 · 
Gepostet: 12.10.2016 - 20:02 Uhr  ·  #13
Nur um sicherzugehen würde ich raten, mal ein anderes Programm zum Test zu installieren. Schnell und einfach und spurenlos wieder zu deinstallieren wäre die Banking 4 Windows-Version von www.subsembly.com. Die beherrscht natürich die Kommunikation mit SPARDA DV. Wenn es damit geht, kann man auf Hibiscus-Seite weitersuchen, wenn es damit auch nicht klappt, dann ist es was Bankrechnerseitiges (wovon ich ausgehe) und man muß nicht weiter Hibiscus "beschuldigen". Nur weil "Bank-Fachleute" sagen, daß bankrechnerseitig alles OK ist, heißt das noch lange nicht, daß das wirklich so ist (Erfahrung...).
KHST
Benutzer
Avatar
Geschlecht:
Herkunft: Mainz
Beiträge: 15
Dabei seit: 10 / 2013
Betreff:

Re: Zugang Sparda Bank

 · 
Gepostet: 14.10.2016 - 19:03 Uhr  ·  #14
Ich war ein paar Tage unterwegs und da konnte ich nicht sofort den Vorschlag die Software Banking 4 Windows-Version zu installieren ausprobieren. Die Software läßt sich tatsächlich ganz einfach installieren. Im Gegensatz zu Hibiscus funktioniert sie allerdings mit meinem Sparda-Bank Konto. Bei Hibiscus kommt weiterhin der bereits beschriebene Fehler. Ich "beschuldige" da niemanden. Ich würde nur gerne wieder mit Hibiscus arbeiten.

Gruß
Karl-Heinz
hibiscus
Benutzer
Avatar
Geschlecht: keine Angabe
Herkunft: Leipzig
Homepage: willuhn.de/
Beiträge: 11351
Dabei seit: 03 / 2005
Betreff:

Re: Zugang Sparda Bank

 · 
Gepostet: 17.10.2016 - 09:00 Uhr  ·  #15
Dann vergleiche mal die Eigenschaften der Bankzugaenge in Subsembly und Hibiscus (Server-Adresse, HBCI-Version, Benutzerkennung, etc.). Irgendwo muss da ein Unterschied sein. Ansonsten bin ich da auch ratlos. Grundsaetzlich funktioniert Sparda ja in Hibiscus.
KHST
Benutzer
Avatar
Geschlecht:
Herkunft: Mainz
Beiträge: 15
Dabei seit: 10 / 2013
Betreff:

Re: Zugang Sparda Bank

 · 
Gepostet: 17.10.2016 - 19:19 Uhr  ·  #16
Ich habe nochmal die Daten verglichen. Sie scheinen in Subsembly und Hibiscus identisch zu sein.
Der Fehler in Hibiscus ist ja bereits, wenn man einen neuen Bankzugang anlegt und dann auf Konfiguration testen klickt.
Gibt es noch andere Daten, die ich vergleichen soll?

Karl-Heinz

Zitat

Protokollversion: FinTS/HBCI 3.0 (Hibiscus-> FinTS 3.0)
Internetadresse: https://fints.bankingonline.de/fints/FinTs30PinTanHttpGate
Bankleitzahl: 55090500
hibiscus
Benutzer
Avatar
Geschlecht: keine Angabe
Herkunft: Leipzig
Homepage: willuhn.de/
Beiträge: 11351
Dabei seit: 03 / 2005
Betreff:

Re: Zugang Sparda Bank

 · 
Gepostet: 17.10.2016 - 19:25 Uhr  ·  #17
Beim Klicken auf "Konfiguration testen" macht Hibiscus nichts anderes, als sich bei der Bank einzuloggen, um solche Fehler eben direkt vor der ersten Verwendung des Bankzugangs zu forcieren. Du koenntest das Testen auch einfach weglassen. Dann wuerde der Fehler erst beim ersten Umsatzabruf hochkommen. Von daher macht es technisch keinen Unterschied, ob der Fehler beim Klicken auf den Test-Button oder beim Ausfuehren von Geschaeftsvorfaellen ausgeloest wird.

Was die Ursache angeht, bin ich inzwischen aber mit meinem Latein am Ende.
KHST
Benutzer
Avatar
Geschlecht:
Herkunft: Mainz
Beiträge: 15
Dabei seit: 10 / 2013
Betreff:

Re: Zugang Sparda Bank

 · 
Gepostet: 30.10.2016 - 10:09 Uhr  ·  #18
Ich war ein paar Tage beruflich unterwegs. Gibt es neue Erkenntnisse? Bei mir tritt leider immer noch der Fehler auf. Ich habe heute Hibiscus auf einem anderen Rechner neu installiert, auf dem Jameica und Hibiscus noch nie installiert waren. Hier tritt allerdings der gleiche Fehler auf. Am Rechner oder irgendwelchen "Installationsleichen" kann es nicht liegen.
Hat jemand noch einen Tipp? Banking 4W funktioniert weiterhin.

Gruß
Karl-Heinz
Der Hypervisor
Benutzer
Avatar
Geschlecht: keine Angabe
Beiträge: 2
Dabei seit: 11 / 2016
Betreff:

Generelles PB ?

 · 
Gepostet: 24.11.2016 - 20:02 Uhr  ·  #19
ich habe das gleiche PB,

bei irgendwelchen Aktionen der Sparda-Bank-HH kommt auf der Webseite allerdings immer eine Vorschaltseite mit dem Inhalt a la .... wir schalten das PIN/TAN Verfahren ab... Haben sie das auch wirklich wirklich wirklich verstanden />IronieOff

könnte das die Ursache sein?
Der Hypervisor
Benutzer
Avatar
Geschlecht: keine Angabe
Beiträge: 2
Dabei seit: 11 / 2016
Betreff:

Teil 2

 · 
Gepostet: 24.11.2016 - 20:43 Uhr  ·  #20
Hab das ganze eben in einer VM nochmals durchgespielt.

Bankzugang eingerichtet, gleicher Status wie vorher
neuen User eingerichtet, wollte ich sowieso, archivuser
backup einer anderen Installation eingespielt, Kontenrundruf gestartet, sind zwar keine neuen Umsätze da, aber scheint zu klappen.

Wo mag das problem sein?
Gewählte Zitate für Mehrfachzitierung:   0